Browse all practice questions for the NANTeL Chemistry Certification – Engineering Fundamentals Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

NANTeL Chemistry Certification – Engineering Fundamentals Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which items are typically considered in water chemistry monitoring related to condenser and secondary loop?
  • Which corrosion increases locally due to high flow, particularly with turbulent flow conditions?
  • Which term describes the impurities such as dissolved oxygen, sodium, chloride, pH, and corrosion products in a plant's secondary system?
  • What is the measure of a substance's ability to conduct electric current?
  • According to the first law of thermodynamics, which expression correctly relates the change in internal energy to heat and work, using q for heat added to the system and w for work done on the system?
  • Using Le Chatelier's principle, what happens to the position of equilibrium for an exothermic reaction when temperature is increased?
  • Which processes are used to control secondary system chemistry?
  • What is the pH at the equivalence point in a strong acid - strong base titration?
  • Which statement correctly contrasts ionic and covalent bonds?
  • How do the reaction quotient Q and the equilibrium constant K differ?
  • Which statement best describes entropy?
  • Which corrosion occurs under a bacteria colony in low-flow areas and is prevented by periodic cleaning and biocides?
  • Explain the principle of simple distillation and when it is effective.
  • For nA = 2 mol and nB = 3 mol, what is the mole fraction xA?
  • Which statement about the solubility of nitrates and ammonium salts is correct?
  • Which term describes the growth of organisms within plant components and is not considered a corrosion mechanism?
  • Which term describes impurity sources such as leaks, foreign materials, and corrosion products entering a system?
  • In a reaction coordinate diagram, what does the activation energy correspond to?
  • Which statement defines an Arrhenius acid?
  • What is the effect of increasing concentration on reaction rate, all else equal?
  • Which of the following are factors that accelerate general corrosion?
  • In thin-layer chromatography, which expression defines the retention factor (Rf) and what does it indicate?
  • Radiolysis in a reactor coolant system primarily leads to the production of which gas, saturating the system?
  • Which statement best describes the activation energy Ea in the Arrhenius equation?
  • Which statement correctly describes the effect of adding a salt containing a common ion on the dissolution of a sparingly soluble salt?
  • In a binary phase diagram, what does a eutectic point represent?
  • Which term refers to a positively charged ion?
  • What is the unit of Faraday's constant?
  • What is used to remove large deposits in the bottom of the steam generator, described as a large filtration element for this system?
  • What is the central idea of collision theory in chemical kinetics?
  • Radionuclides in the coolant consist of which groups?
  • In all volatile treatment, which of the following is not typically included?
  • Which system's chemistry is described as 'Secondary System Chemistry'?
  • Which statement is NOT an assumption of the ideal gas model?
  • In a reactor coolant purification loop, what term describes removing a volume of impure water and replacing it with pure water to reduce impurity fraction?
  • Activation products in the coolant are primarily produced by activation of which materials?
  • The process by which metal ions with excess electrons seek other ions to accept electrons, leading to material degradation, is called?
  • Which explanation correctly accounts for why the equivalence point pH is greater than 7 in the titration of a weak acid with a strong base?
  • In which titration would the pH at the equivalence point be less than 7?
  • Which statement best describes corrosion that occurs uniformly across a metal surface?
  • What factor guides the pH adjustment in PWR demineralizer operation?
  • Which type of leakage is associated with the main concern of releasing radioactive materials, requiring quick detection, and is addressed in the TS documents?
  • Which organisms are of concern in biofouling?
  • Uniform attack on a metal surface by its environment is known as which term?
  • Which statement best describes covalent compounds?
  • If the volume of a fixed amount of gas at constant temperature is doubled, what happens to pressure?
  • Among typical secondary system impurities, which group includes dissolved oxygen, sodium, chloride, pH, and corrosion products?
  • Which scenario increases the entropy of a system?
  • What is the pH of a 0.010 M HCl solution?
  • Which equation represents the ideal gas law?
  • Which of the following statements correctly characterizes a strong acid versus a weak acid with examples?
  • Which items are typically listed as concerns or components addressed by water chemistry monitoring in a plant?
  • Define buffer capacity and how buffer concentration affects it.
  • In a reversible reaction at chemical equilibrium, which condition holds true?
  • Which statement best describes a reversible reaction?
  • What is the primary purpose of demineralizer beds in a PWR water system?
  • Which corrosion type is a concern for leak conditions in a nuclear reactor system due to boron content in coolant?
  • If the partial pressure of a gas above a liquid is doubled, according to Henry's law, how does the concentration of dissolved gas change (assume constant temperature)?
  • What information does UV–visible spectroscopy provide about a compound?
  • Which statement correctly distinguishes adsorption from absorption?
  • Which statement best describes how a higher Rf value relates to polarity on a polar stationary phase?
  • What term describes a substance that speeds up the rate of a chemical reaction without being consumed?
  • Which of the following describes typical activation product categories in reactor coolant?
  • In a saturated solution, what is the correct description of the solubility product constant Ksp?
  • Which of the following are purification processes used in reactor coolant systems?
  • Which parameters constitute the commonly monitored set in water chemistry monitoring?
  • Secondary system chemistry control commonly employs which set of processes?
  • In chemistry, which statement best defines a cation?
  • What is the primary purpose of Steam Generator Blowdown in a nuclear plant?
  • In galvanic protection practice, which metal corrodes to protect the other?
  • Which item is explicitly listed as a basic item of personal protective equipment in a chemistry laboratory?
  • For a buffer containing equal concentrations of a weak acid and its conjugate base, the pH is approximately equal to...
  • Which statement defines oxidation?
  • Which statement about galvanic coupling and protection is correct?
  • In the electrolysis of aqueous sodium chloride with sufficient chloride ion concentration, what are the primary products at the cathode and anode, respectively?
  • Shocks and stresses increase corrosion by exposing the active layer of metal which was previously covered by the passive layer. How are these shocks and stresses described?
  • Which type of corrosion is caused by a crack or crevice that creates a potential difference and can be mitigated by controlling dissolved oxygen levels?
  • Which items are commonly used as personal protective equipment in a chemistry laboratory?
  • A gas-phase reaction experiences increased pressure. Which side of the equation is favored?
  • What is the potential for electrons to flow from a metal to another substance called?
  • In ion exchanger effectiveness parameters, which statement is true about flow rate?
  • In a solution, which term correctly identifies the dissolving medium?
  • What is the stated purpose of zinc injection in PWR secondary systems?
  • In Beer-Lambert law, what does A stand for?
  • Which form expresses the Gibbs free energy and when is a process spontaneous at constant temperature and pressure?
  • How does increasing temperature affect the rate of a reaction that has a catalyst present?
  • Avogadro's number is defined as...
  • Rate of impurity addition equals rate of impurity removal.
  • During the titration of a weak acid with a strong base, the pH at the half-equivalence point is equal to which property of the weak acid?
  • Which statement best distinguishes electrolytes from non-electrolytes in solution?
  • In a closed system, at chemical equilibrium, what happens to the concentrations of reactants and products over time?
  • What term describes the transport, deposition, and activation of corrosion products within the reactor coolant system that can circulate to core components and piping?
  • Which type of cracking is environmentally induced and worsened by progressive corrosion, common at atomic boundaries in alloys?
  • Which statement best describes the relation of ion product to Ksp when a sparingly soluble salt is in solution?
  • Any unwanted material.
  • In PWR demineralizer operation, which statement correctly describes pH handling?
  • If ΔG < 0 at a given temperature, which statement about the equilibrium constant K is true?
  • Using Faraday's law, how many grams of copper deposit when 96485 C of charge pass through?
  • Which corrosion mechanism involves microbial activity and can be mitigated by periodic cleaning and biocides?
  • Which field concerns chemical control in the non-primary circuits of a nuclear plant?
  • All Volatile Treatment includes which of the following chemical classes?
  • How does increasing temperature affect the rate of a chemical reaction?
  • What is the effect of a catalyst on the activation energy and the reaction rate?
  • Pitting corrosion is best described as which type of attack?
  • Which corrosion type only impacts PWRs and is a concern for leak conditions as the primary system is stainless steel?
  • What are common impurity sources described for boiling water reactors (BWRs)?
  • Which of the following is an electrolyte when dissolved in water?
  • Which statement best describes how sacrificial anodes protect metal surfaces from corrosion?
  • What is the primary function of fuel rod cladding?
  • Which statement defines reduction?
  • What term describes the process by which metal is attacked and broken down by reactions with its environment (such as water)?
  • Avogadro's number defines...
  • Which corrosion occurs specifically in crevices or under deposits on metal surfaces?
  • Which system is part of the plant's major mechanical systems?
  • Which statement about pH is correct?
  • Which term describes a negatively charged ion?
  • Which statement correctly contrasts galvanic and electrolytic cells?
  • Which option identifies a positively charged ion?
  • Which equation represents the Beer–Lambert law?
  • What term describes a combination of two or more metals?
  • What is the purpose of pH maintenance in reactor cooling systems?
  • If 48242 C of charge pass through a copper solution, how many grams of copper deposit?
  • Water from natural bodies; leaks between systems; foreign materials from maintenance or installation; corrosion.
  • Which term describes the combination of elements formed by transferring or sharing electrons?
  • Which corrosion occurs as local corrosion in small surface irregularities, often with pitting in stagnant water?
  • In a galvanic couple, which factor primarily determines which metal corrodes preferentially?
  • Given Ksp for CaF2 = 2.1×10^−10 and dissolution CaF2(s) ⇌ Ca2+(aq) + 2F−(aq). Find molar solubility s.
  • Which device removes charged impurities using a bed of resin?
  • When Q equals K, what is true?
  • In a solution, which term describes the substance that dissolves?
  • What information does a binary phase diagram provide?
  • In pressurized water reactor (PWR) water systems, what component is described as a bed made of small spherical beads used as a filter?
  • Migration of fission gas atoms through the metal cladding is known as which phenomenon?
  • What does Hess's law state about the enthalpy change of a reaction?
  • Activated corrosion products are formed as a result of neutron activation of which materials?
  • Do catalysts get consumed in a chemical reaction?
  • How can you identify an electrolyte from a compound's behavior?
  • Which equation correctly expresses the Arrhenius relationship between the rate constant and temperature?
  • In safety context, what is used as an indicator of potential radiological leaks?
  • Which statement describes a primary purpose of reactor chemistry control?
  • Which of the following is a general corrosion factor?
  • Valence numbers are generally within which range?
  • Which statement defines an Arrhenius base?
  • Which corrosion is associated with high flow and turbulence and accelerates material loss?
  • What is the term for an energy level representing the distance of an electron from the nucleus of an atom?
  • Which of the following are corrosion control methods?
  • Which phrase best describes the categories of fission products affecting coolant quality?
  • In the Arrhenius equation, what does the pre-exponential factor A represent?
  • What effect does a catalyst have on activation energy and the rate of a reaction?
  • Which process involves the loss of electrons?
  • Which fission product gas is a common example found in reactor coolant?
  • What is the term for fissile uranium that remains on the surface of a fuel pin after manufacturing?
  • A reaction has a theoretical yield of 2.50 g but an actual yield of 1.60 g. What is the percent yield?
  • What concept describes the number of electrons an atom can give up, with positive valence numbers donating and negative numbers receiving?
  • All Volatile Treatment involves the use of volatile compounds in water purification, including hydrazine, ammonia, ethanolamine, and methoxypropylamine. What is the name of this treatment?
  • If the equilibrium constant K for a reaction at a given temperature is much greater than 1, what does this imply about the position of equilibrium?
  • Using Henderson–Hasselbalch, estimate the pH of a buffer solution containing 0.100 M acetic acid (HA) and 0.100 M sodium acetate (A−) with Ka = 1.8×10−5.
  • Which statement correctly contrasts mass percent and mole percent in a solution?
  • Activation energy is defined as...
  • Are electrolytes good conductors in aqueous solution?
  • Calculate the pH of 0.10 M acetic acid (Ka = 1.8×10−5).
  • A solution is prepared by dissolving 5.00 g of NaCl (MW 58.44 g/mol) in water to a final volume of 0.500 L. What is the molarity?
  • Which process involves the gain of electrons?
  • What forms the primary fission product barrier in a nuclear fuel rod?
  • In pressurized water reactors, a leakage path from the primary to the secondary side is referred to as what?
  • Which process is associated with generating hydrogen and oxygen gas in water under irradiation in a reactor coolant system?
  • A solution contains 2.00 g solute in 100.0 g solution. What is the mass percent of solute?
  • What is the pH of a neutral solution at 25°C?
  • Explain the common ion effect and how it shifts solubility.
  • Which mechanism involves the combination of mechanical stress with chemical attack to cause cracking in metals?
  • In a mixture with nA = 4 mol and nB = 1 mol, what is xA?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy